Part Number Hot Search : 
LHR2043 MT8979AP CY7C15 C2188 AAT31 OPA9410 SI8460 BAV20
Product Description
Full Text Search
 

To Download CFB0301 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 CFB0301
hOES@d""OE@r"S@l*Mn*OETM@gaTM@fet
mOE"OEY@b*..."L@i"N@QPWYU@r*`'@rNL@h*TM*"L@tYTM@WWPYY t'Z@RXQNYXXNTVPP@@fYZ@RXQNYXXNTVQU@@N"OE"OEY...*..."N*" RPPU@mOE"OEY@b*..."L@i"N
CFB0301
Product Specifications June 2002 Features Low-Noise Figure from 0.8 to 2.0 GHz High Gain High Intercept Point Highly Stable Easily Matched to 50 70 mil Package Applications Cellular Base Stations PCS Base Stations Industrial Data Networks Description
Celeritek's CFB0301 is a high performance GaAs MESFET with 600 m gate width and 0.25 m gate length. The low noise figure and high intercept point of this device makes it well suited for use as the low-noise amplifier of the base station receiver in PCS, Japanese PHS, AMPS, GSM and other communications systems. The CFB0301 is in an industry-standard 70 mil package. It is surface mountable and available in tape and reel. (1 of 3)
High Dynamic Range Low-Noise GaAs FET
Electrical Specifications (TA = 25C, 2 GHz)
Parameters Conditions Min Typ Standard Deviation 4 Max Units
Vd = 2V, Id = 25 mA Noise Figure 2 Associated Gain 2 Pout 1, 3 IP3 3 Id 3 Vd = 4V, Id = 30 mA Noise Figure 2 Associated Gain 2 Pout 1, 3 IP3 3 Id 3 Vd = 4V, Id = 70 mA Noise Figure 2 Associated Gain 2 Pout 1, 3 IP3 3 Id 3 Transconductance Saturated Drain Current Pinchoff Voltages Thermal Resistance
@ Noise Figure P-1 +5 dBm POUT/Tone @ P-1
0.6 16 15.0 24 35 0.7 17 20.5 30 56 0.8 17 21 34 77 70 120 -2.5 140 150 -1.3 200 180 -0.5 0.08 0.4 0.4 0.9 0.9
dB dB dBm dBm mA dB dB dBm dBm mA dB dB dBm dBm mA mho mA V C/W
@ Noise Figure P-1 +5 dBm POUT/Tone @ P-1
@ Noise Figure P-1 +5 dBm POUT/Tone @ P-1 Vds = 2 V, Vgs = 0 V Vds = 2 V, Vgs = 0 V Vds = 2 V, Ids = 1 mA @ Tcase = 150C liquid crystal test
16 20 32
Notes: 1. @ T case = 25C. Derate 5 mW/C for Tcase >25C. 2. Input matched for low noise. 3. Matched for power transfer. 3236 Scott Boulevard Santa Clara, California 95054
4. Standard deviation based on 10 wafers randomly selected and is provided as an estimate of the distribution only. Trademarks are the property of their respected owners. Phone: (408) 986-5060 Fax: (408) 986-5095
CFB0301
Typical Noise Parameters (Vds = 4 V, Ids = 30 mA)
Frequency (GHz) Fmin 1 (dB) Gamma Opt Mag Ang Rn/50
Product Specifications - June 2002
(2 of 3)
Absolute Maximum Ratings
Parameter Symbol Rating
0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6
0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5
0.6 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.5 0.5
27 29 32 35 38 41 45 49 54 60
0.19 0.17 0.18 0.18 0.17 0.16 0.15 0.15 0.14 0.13
Drain-Source Voltage Gate-Source Voltage Drain Current Continuous Dissipation1 Channel Temperature Storage Temperature
Vds Vgs Ids Pt Tch Tstg
+8V -5V Idss 750 mW 175C -65C to +150C
Note: 1. Fmin values reflect the circuit losses in the test fixture when matched to optimum noise figure.
Typical Performance
Optimum Noise Figure and Associated Gain vs Frequency Vds = 2V, Ids = 25 mA Associated Gain vs I ds Vds = 2V, Frequency = 2 GHz
2.5
25
25
Associated Gain (dB)
Noise Figure (dB)
2.0 1.5 1.0
Associated Gain
20 15 10
Gain (dB)
20 15 10 5 0 10
Noise Figure 0.5 0 2 4 6 8 Frequency (GHz) 10 12 5 0
20
30
40 50 Ids (mA)
60
70
Optimum Noise Figure vs I ds & V ds Frequency = 2 GHz
2.5 2.0 1.5 1.0 0.5 2V 0.0 10 20 30 40 50 Ids (mA) 60 70 4V
Typical Scattering Parameters (TA = 25C, VDS = 2 V, IDS = 25 mA)
Frequency (GHz) S11 Mag Ang Mag (dB) S21 Ang MAG (dB) S12 ANG MAG S22 ANG
0.5 1.0 2.0 3.0 4.0 5.0
0.98 0.94 0.85 0.76 0.70 0.64
-20 -40 -76 -108 -130 -150
Noise Figure (dB)
7.17 6.90 6.00 5.00 4.30 3.83
161 148 119 95 75 55
0.02 0.03 0.05 0.07 0.08 0.09
78 70 52 38 30 20
0.42 0.41 0.36 0.32 0.30 0.27
-11 -24 -46 -65 -75 -85
3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095
CFB0301
Product Specifications - June 2002 Test Circuit
Evaluation Board Schematic
Evaluation Board Substrate: ER = 4.65 Thickness = 0.036 Transmission Lines (Dimensions in mm.): T1: 0.203 (W) x 11.55 (L) T2: 0.203 (W) x 5.05 (L)
C36 39 pF C35 39 pF C34 39 pF C33 39 pF R23 18 C26 39 pF C28 39 pF RF IN T1 T2 L26 82 nH C31 39 pF RF OUT Vdd R21 5.6 C25 .01 pF C23 1000 pF B21 BEAD C24 39 pF
(3 of 3)
L28 82 nH R26 8.2 R22 18 C32 39 pF
C37 39 pF
C31 39 pF
C30 39 pF
C29 39 pF
PB-CFB0301 Evaluation Board
(SMA Connectors not shown)
Evaluation Board Parts List
Item Reference Designator Description Quantity Manufacturer Part Number
1 2 3 4 5 6 7 8
B21 C23 C21, C24, C26, C28-C37 C25 L26, L28 R21 R22, R23 R26
Chip ferrite bead 0805 Capacitor, 1000pF, 0603 Capacitor, 39pF, 0603 Capacitor, 0.01F, 0603 Inductor, 82nH, INDA5T-3 Resistor, 5.6 Ohm, 0603 Resistor, 18 Ohm, 0603 Resistor, 8.2 Ohm, 0603
1 1 13 1 2 1 2 1
World Products Rohm Rohm Rohm Toko Dale Dale Dale
HB-1H2012-260JT MCH185A102JK MCH185A039JK MCH185A103JK LL2012-F8NK RCWP575 560 RCWP575 181 RCWP575 820
Ordering Information
The CFB0301GaAs FET is available in tape and reel. An evaluation board is also available. Ordering part numbers are listed. Part Number for Ordering Function Package CFB0301 Low-Noise high dynamic range FET 70 mil package CFB0301-000T Low-Noise high dynamic range FET 70 mil package in tape and reel PB-CFB0301 Evaluation Board
Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Celeritek does not convey any license under its patent rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer.
3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095


▲Up To Search▲   

 
Price & Availability of CFB0301

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X